allpaintcolours.co.uk

Marble Dust by Craig & Rose is a near-white muted yellow. Hex: #F9F9F5. RGB: 249, 249, 245. Price: approximately £18.00 per litre. The nearest equivalent from another manufacturer is Farrow & Ball All White (ΔE 0.6, “identical”), priced at approximately £25.60 per litre. Other close matches include Edward Bulmer Fair White (ΔE 0.8) and Earthborn St John (ΔE 0.9).

Marble Dust by Craig & Rose

Hex
#F9F9F5
RGB
249, 249, 245
Manufacturer
Craig & Rose
Price per litre
£18.00
Price per m2 (?)
£2.57
Saved on this device — open the palette panel any time to compare or share. Buy a sample

Nearest matches from other manufacturers

Colour Manufacturer ΔE Match quality Price/L Price/m2 (?)
All White Farrow & Ball 0.6 Identical £25.60 (£7.60 more) £3.94
Fair White Edward Bulmer 0.8 Identical £26.40 (£8.40 more) £4.40
St John Earthborn 0.9 Identical £24.00 (£6.00 more) £4.80
Loft White (No.3) Little Greene 1.0 Identical £28.00 (£10.00 more) £4.31
Pure White (No.No.1) Mylands 1.0 Identical £27.20 (£9.20 more) £3.63
Flint (No.3) Little Greene 1.0 Near-identical £28.00 (£10.00 more) £4.31
Flutterby Earthborn 1.2 Near-identical £24.00 (£6.00 more) £4.80
Snow Scene Dulux 1.4 Near-identical £10.20 (£7.80 less) £1.57
Up Up Away Earthborn 1.5 Near-identical £24.00 (£6.00 more) £4.80

Colour neighbourhood

Marble Dust All White Fair White St John Loft White Pure White Flint Flutterby Snow Scene

Coverage & application

Manufacturer figures from the Craig & Rose Product Advice Sheet. Real-world coverage is typically 15-20% lower.

Finish Coverage Coats Sheen Scrub class Touch dry Recoat VOC
Chalky Emulsion PAS 14 m²/L 2 5% 1h 4h 1.5 g/L
Eggshell PAS 12 m²/L 2 1h 4h 1.5 g/L
Gloss PAS 12 m²/L 2 1h 12h 12 g/L
Surface preparation by substrate

Chalky Emulsion

General application
Apply 2 coats by brush or roller. New dry plaster surfaces should be primed with a coat of Craig & Rose Primer Undercoat or other suitable wall primer. Chalky emulsion paint can be thinned slightly with 5-10% of clean water to counteract any excessive suction when being used directly on to plaster surfaces. See can for further details. If using packs with different batch numbers then blend before use.

Eggshell

General application
Apply 2 coats by brush or roller (synthetic bristle brushes give good results). Previously painted gloss or lustre surfaces should be abraded to improve adhesion. See can for further details. Bare wood or plaster surfaces should be primed with Craig & Rose Primer Undercoat for best results. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood or metal as they may contain harmful lead. For further advice, please contact the British Coatings Federation Ltd, James House, Bridge Street, Leatherhead. KT22 7EP.

Gloss

General application
Apply by brush or roller (synthetic bristle brushes give good results). Previously painted or glossy surfaces should be abraded before painting to improve adhesion. A second coat should be applied for best results. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood or metal as they may contain harmful lead. For further advice, please contact the British Coatings Federation Ltd, James House, Bridge Street, Leatherhead. KT22 7EP.

Craig & Rose primers & undercoats

For new plaster, bare wood/metal, or significant colour changes. Tinted to match your topcoat tone for best opacity.

Product For Coverage Coats Tinted tones Sizes VOC
1829 All Purpose Undercoat PAS undercoat 2

What's on your walls?

Got this colour at home? Let us know.