allpaintcolours.co.uk

Jasper Yellow by Craig & Rose is a pale warm yellow. Hex: #E6DDB8. RGB: 230, 221, 184. Price: approximately £18.00 per litre. The nearest equivalent from another manufacturer is Farrow & Ball Pale Hound (ΔE 0.8, “identical”), priced at approximately £25.60 per litre. Other close matches include Johnstone's Slices Of Happy (ΔE 0.8) and Dulux Cobble Cove (ΔE 2.2).

Jasper Yellow by Craig & Rose

Hex
#E6DDB8
RGB
230, 221, 184
Manufacturer
Craig & Rose
Price per litre
£18.00
Price per m2 (?)
£2.57
Saved on this device — open the palette panel any time to compare or share. Buy a sample

Nearest matches from other manufacturers

Colour Manufacturer ΔE Match quality Price/L Price/m2 (?)
Pale Hound Farrow & Ball 0.8 Identical £25.60 (£7.60 more) £3.94
Slices Of Happy Johnstone's 0.8 Identical £12.36 (£5.64 less) £2.06
Cobble Cove Dulux 2.2 Near-identical £10.20 (£7.80 less) £1.57
Jurassic Coast Johnstone's 2.3 Near-identical £12.36 (£5.64 less) £2.06
Soleil Johnstone's 2.3 Near-identical £12.36 (£5.64 less) £2.06
Cream (No.ZOP0020) Zoffany 2.3 Near-identical £22.00 (£4.00 more)
Cavendish Cream (No.No.120) Mylands 2.3 Near-identical £27.20 (£9.20 more) £3.63
Silk Star Johnstone's 2.5 Near-identical £12.36 (£5.64 less) £2.06
Cream Johnstone's 2.5 Near-identical £6.14 (£11.86 less) £1.02

Colour neighbourhood

Jasper Yellow Pale Hound Slices Of Happy Cobble Cove Jurassic Coast Soleil Cream Cavendish Cream Silk Star

Coverage & application

Manufacturer figures from the Craig & Rose Product Advice Sheet. Real-world coverage is typically 15-20% lower.

Finish Coverage Coats Sheen Scrub class Touch dry Recoat VOC
Chalky Emulsion PAS 14 m²/L 2 5% 1h 4h 1.5 g/L
Eggshell PAS 12 m²/L 2 1h 4h 1.5 g/L
Gloss PAS 12 m²/L 2 1h 12h 12 g/L
Surface preparation by substrate

Chalky Emulsion

General application
Apply 2 coats by brush or roller. New dry plaster surfaces should be primed with a coat of Craig & Rose Primer Undercoat or other suitable wall primer. Chalky emulsion paint can be thinned slightly with 5-10% of clean water to counteract any excessive suction when being used directly on to plaster surfaces. See can for further details. If using packs with different batch numbers then blend before use.

Eggshell

General application
Apply 2 coats by brush or roller (synthetic bristle brushes give good results). Previously painted gloss or lustre surfaces should be abraded to improve adhesion. See can for further details. Bare wood or plaster surfaces should be primed with Craig & Rose Primer Undercoat for best results. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood or metal as they may contain harmful lead. For further advice, please contact the British Coatings Federation Ltd, James House, Bridge Street, Leatherhead. KT22 7EP.

Gloss

General application
Apply by brush or roller (synthetic bristle brushes give good results). Previously painted or glossy surfaces should be abraded before painting to improve adhesion. A second coat should be applied for best results. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood or metal as they may contain harmful lead. For further advice, please contact the British Coatings Federation Ltd, James House, Bridge Street, Leatherhead. KT22 7EP.

Craig & Rose primers & undercoats

For new plaster, bare wood/metal, or significant colour changes. Tinted to match your topcoat tone for best opacity.

Product For Coverage Coats Tinted tones Sizes VOC
1829 All Purpose Undercoat PAS undercoat 2

What's on your walls?

Got this colour at home? Let us know.