Scout's Honour by Coat is a deep red. Hex: #885141. RGB: 136, 81, 65. Price: approximately £24.80 per litre. The nearest equivalent from another manufacturer is Dulux Sicilian Summer 1 (ΔE 2.4, “near-identical”), priced at approximately £14.40 per litre. Other close alternatives include Mylands Henna (ΔE 2.4) and Johnstone's Rich Clay (ΔE 2.6).
Scout's Honour by Coat
- Hex
#885141- RGB
- 136, 81, 65
- Manufacturer
- Coat
- Price per litre
- £24.80
- Price per m2 (?)
- £4.96
Saved on this device — open the palette panel any time to compare or share.
Buy a sample
Now inside your AI toolConnect free →
Nearest matches & alternatives from other brands
| Colour | Manufacturer | ΔE | Match quality | Price/L | Price/m2 (?) |
|---|---|---|---|---|---|
| Sicilian Summer 1 | Dulux | 2.4 | Near-identical | £14.40 (£10.40 less) | £2.22 |
| Henna (No.BH.18) | Mylands | 2.4 | Near-identical | £27.20 (£2.40 more) | £3.63 |
| Rich Clay | Johnstone's | 2.6 | Near-identical | £13.37 (£11.43 less) | £2.23 |
| Hunt Club Red | Johnstone's | 2.8 | Near-identical | £13.37 (£11.43 less) | £2.23 |
| Etruscan Red | Farrow & Ball | 3.1 | Very close | £26.40 (£1.60 more) | £4.06 |
| Arabian Red | Craig & Rose | 3.5 | Very close | £18.00 (£6.80 less) | £2.57 |
| Burnished Leaf | Johnstone's | 3.5 | Very close | £13.37 (£11.43 less) | £2.23 |
| Sang de Boeuf | Edward Bulmer | 3.7 | Very close | £26.40 (£1.60 more) | £4.40 |
| Tuscan Red (No.140) | Little Greene | 3.9 | Very close | £29.20 (£4.40 more) | £4.49 |
Sicilian Summer 1
Dulux
Near-identical
ΔE 2.4
£14.40/L
£2.22/m2
Henna
Mylands
Near-identical
ΔE 2.4
£27.20/L
£3.63/m2
Rich Clay
Johnstone's
Near-identical
ΔE 2.6
£13.37/L
£2.23/m2
Hunt Club Red
Johnstone's
Near-identical
ΔE 2.8
£13.37/L
£2.23/m2
Etruscan Red
Farrow & Ball
Very close
ΔE 3.1
£26.40/L
£4.06/m2
Arabian Red
Craig & Rose
Very close
ΔE 3.5
£18.00/L
£2.57/m2
Burnished Leaf
Johnstone's
Very close
ΔE 3.5
£13.37/L
£2.23/m2
Sang de Boeuf
Edward Bulmer
Very close
ΔE 3.7
£26.40/L
£4.40/m2
Tuscan Red
Little Greene
Very close
ΔE 3.9
£29.20/L
£4.49/m2
Compare Scout's Honour with other Coat colours
Deciding between two Coat shades? See Scout's Honour side by side with its closest stablemates.
Colour neighbourhood
Coverage & application
Manufacturer figures from the Coat Product Advice Sheet. Real-world coverage is typically 15-20% lower.
| Finish | Coverage | Coats | Sheen | Scrub class | Touch dry | Recoat | VOC |
|---|---|---|---|---|---|---|---|
| Flat Matt PAS | 10 m²/L | 2 | 2% | 1 | 30 min | 2h | 2.9 g/L |
Surface preparation by substrate
Flat Matt
- General application
- Stir thoroughly before use. Apply 2 coats of COAT paint by brush or roller application. If light or bright colours are to be used an additional coat may be required. Tones of separate batches may vary slightly, for colour consistency purchase sufficient paint for the complete job at one time. Preparation of the surface to be painted is vital to the performance of your COAT paint. ● Make good any structural cracks or defects and match the finish to the existing substrate. Use flexible fillers only. ● Wash down and remove old flaking or defective coating. ● A glossy painted surface must be sanded to a matt finish prior to applying the first coat of paint. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. ● Bare metal requires a suitable primer. ● COAT paints are self-priming, however if a heavily repaired substrate has a wide variation of porosity and colours, priming is recommended as a first coat to create an even base colour. ● For interior use, prime new, bare and porous surfaces using one coat of the appropriate COAT paint, thinned with water (1 part water, 9 parts paint). (Do not apply at temperatures below 5oC).
What's on your walls?
Got this colour at home? Let us know.