allpaintcolours.co.uk

Portobello by Coat is a light muted red. Hex: #BD918C. RGB: 189, 145, 140. Price: approximately £24.80 per litre. The nearest equivalent from another manufacturer is Edward Bulmer Nicaragua (ΔE 2.0, “near-identical”), priced at approximately £26.40 per litre. Other close alternatives include Craig & Rose Wedgwood Lilac (ΔE 2.1) and Zoffany Tuscan Pink (ΔE 2.2).

Portobello by Coat

Hex
#BD918C
RGB
189, 145, 140
Manufacturer
Coat
Price per litre
£24.80
Price per m2 (?)
£4.96
Saved on this device — open the palette panel any time to compare or share. Buy a sample Now inside your AI toolConnect free →

Nearest matches & alternatives from other brands

Colour Manufacturer ΔE Match quality Price/L Price/m2 (?)
Nicaragua Edward Bulmer 2.0 Near-identical £26.40 (£1.60 more) £4.40
Wedgwood Lilac Craig & Rose 2.1 Near-identical £18.00 (£6.80 less) £2.57
Tuscan Pink (No.ZOP1146) Zoffany 2.2 Near-identical £23.20 (£1.60 less) —
Pressed Petal Dulux 2.7 Near-identical £10.80 (£14.00 less) £1.66
Antique Terracotta Johnstone's 2.7 Near-identical £13.37 (£11.43 less) £2.23
Rose Gold Crown 2.8 Near-identical — —
Floral Tapestry Johnstone's 3.0 Near-identical £13.37 (£11.43 less) £2.23
Pepperberry Johnstone's 3.0 Very close £13.37 (£11.43 less) £2.23
Nomadic Glow 2 Dulux 3.4 Very close £14.40 (£10.40 less) £2.22

Colour neighbourhood

Portobello Nicaragua Wedgwood Lilac Tuscan Pink Pressed Petal Antique Terracot.. Rose Gold Floral Tapestry Pepperberry

Coverage & application

Manufacturer figures from the Coat Product Advice Sheet. Real-world coverage is typically 15-20% lower.

Finish Coverage Coats Sheen Scrub class Touch dry Recoat VOC
Flat Matt PAS 10 m²/L 2 2% 1 30 min 2h 2.9 g/L
Surface preparation by substrate

Flat Matt

General application
Stir thoroughly before use. Apply 2 coats of COAT paint by brush or roller application. If light or bright colours are to be used an additional coat may be required. Tones of separate batches may vary slightly, for colour consistency purchase sufficient paint for the complete job at one time. Preparation of the surface to be painted is vital to the performance of your COAT paint. ● Make good any structural cracks or defects and match the finish to the existing substrate. Use flexible fillers only. ● Wash down and remove old flaking or defective coating. ● A glossy painted surface must be sanded to a matt finish prior to applying the first coat of paint. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. ● Bare metal requires a suitable primer. ● COAT paints are self-priming, however if a heavily repaired substrate has a wide variation of porosity and colours, priming is recommended as a first coat to create an even base colour. ● For interior use, prime new, bare and porous surfaces using one coat of the appropriate COAT paint, thinned with water (1 part water, 9 parts paint). (Do not apply at temperatures below 5oC).

What's on your walls?

Got this colour at home? Let us know.