One Man's Trash by Coat is a deep muted orange. Hex: #6B5D4E. RGB: 107, 93, 78. Price: approximately £24.80 per litre. The nearest equivalent from another manufacturer is RAL Classic Pearl beige (ΔE 0.9, “identical”). Other close alternatives include Dulux Bramble Ramble (ΔE 1.0) and Johnstone's Mocha (ΔE 1.4).
One Man's Trash by Coat
- Hex
#6B5D4E- RGB
- 107, 93, 78
- Manufacturer
- Coat
- Price per litre
- £24.80
- Price per m2 (?)
- £4.96
Saved on this device — open the palette panel any time to compare or share.
Buy a sample
Now inside your AI toolConnect free →
Nearest matches & alternatives from other brands
| Colour | Manufacturer | ΔE | Match quality | Price/L | Price/m2 (?) |
|---|---|---|---|---|---|
| Pearl beige (No.1035) | RAL Classic | 0.9 | Identical | — | — |
| Bramble Ramble | Dulux | 1.0 | Identical | £14.40 (£10.40 less) | £2.22 |
| Mocha | Johnstone's | 1.4 | Near-identical | £7.53 (£17.27 less) | £1.26 |
| Fairground | Johnstone's | 1.6 | Near-identical | £13.37 (£11.43 less) | £2.23 |
| Curlew | Johnstone's | 2.3 | Near-identical | £13.37 (£11.43 less) | £2.23 |
| Country Boots | Dulux | 2.6 | Near-identical | £14.40 (£10.40 less) | £2.22 |
| Chocolate Ripple | Johnstone's | 3.1 | Very close | £13.37 (£11.43 less) | £2.23 |
| Poppy Pods | Johnstone's | 3.1 | Very close | £13.37 (£11.43 less) | £2.23 |
| Salted Pretzel | Johnstone's | 3.1 | Very close | £13.37 (£11.43 less) | £2.23 |
Pearl beige
RAL Classic
Identical
ΔE 0.9
Bramble Ramble
Dulux
Identical
ΔE 1.0
£14.40/L
£2.22/m2
Mocha
Johnstone's
Near-identical
ΔE 1.4
£7.53/L
£1.26/m2
Fairground
Johnstone's
Near-identical
ΔE 1.6
£13.37/L
£2.23/m2
Curlew
Johnstone's
Near-identical
ΔE 2.3
£13.37/L
£2.23/m2
Country Boots
Dulux
Near-identical
ΔE 2.6
£14.40/L
£2.22/m2
Chocolate Ripple
Johnstone's
Very close
ΔE 3.1
£13.37/L
£2.23/m2
Poppy Pods
Johnstone's
Very close
ΔE 3.1
£13.37/L
£2.23/m2
Salted Pretzel
Johnstone's
Very close
ΔE 3.1
£13.37/L
£2.23/m2
Compare One Man's Trash with other Coat colours
Deciding between two Coat shades? See One Man's Trash side by side with its closest stablemates.
Colour neighbourhood
Coverage & application
Manufacturer figures from the Coat Product Advice Sheet. Real-world coverage is typically 15-20% lower.
| Finish | Coverage | Coats | Sheen | Scrub class | Touch dry | Recoat | VOC |
|---|---|---|---|---|---|---|---|
| Flat Matt PAS | 10 m²/L | 2 | 2% | 1 | 30 min | 2h | 2.9 g/L |
Surface preparation by substrate
Flat Matt
- General application
- Stir thoroughly before use. Apply 2 coats of COAT paint by brush or roller application. If light or bright colours are to be used an additional coat may be required. Tones of separate batches may vary slightly, for colour consistency purchase sufficient paint for the complete job at one time. Preparation of the surface to be painted is vital to the performance of your COAT paint. ● Make good any structural cracks or defects and match the finish to the existing substrate. Use flexible fillers only. ● Wash down and remove old flaking or defective coating. ● A glossy painted surface must be sanded to a matt finish prior to applying the first coat of paint. Avoid the inhalation of dust. Wear a suitable face mask when dry sanding. ● Bare metal requires a suitable primer. ● COAT paints are self-priming, however if a heavily repaired substrate has a wide variation of porosity and colours, priming is recommended as a first coat to create an even base colour. ● For interior use, prime new, bare and porous surfaces using one coat of the appropriate COAT paint, thinned with water (1 part water, 9 parts paint). (Do not apply at temperatures below 5oC).
What's on your walls?
Got this colour at home? Let us know.